How to Check for Dye Migration on Heat-Transfer Logos for Polyester Caps

Mục lục

A light logo that picks up the color of a polyester cap after heat pressing may be showing dye migration. Record when the color change appeared and keep a control sample to distinguish dye bleed from show-through.

How to tell dye migration from fabric show-through

Dye migration occurs when dye from the fabric moves into the transfer. Show-through occurs when the transfer provides too little coverage to hide the fabric color. Stahls’ technical handbook.

Check the logo once it cools and at the agreed intervals. A tint that appears or deepens over time can point to dye migration. Timing is one clue, since migration can also show up during pressing.

Illustration of two red caps with light heat transfers showing different degrees of tinting
Two heat-transfer samples side by side for comparing color after pressing.

What to record for the next press trial

ItemWhat to record on the trial sheet
Base fabricFabric code, color, lot and any available dyeing or printing records.
Transfer materialFilm or transfer material code, target logo color and any proposed dye-blocking option.
Press settingsActual temperature, time, pressure and equipment used, following the instructions for that transfer material.
Post-press observationsCheck times, lighting, logo color, edge condition, adhesion and any press marks on the cap.
Approval sampleKeep a sample with the color, fabric lot and construction that represent the caps to be ordered.
These records help identify changes associated with the fabric, the transfer or the pressing process.

Choose control samples by color and fabric lot

Apply the same transfer to the test fabric and a known control. Compare both under the same light. In a hypothetical trial, the white logo on red gradually turns pink while the control keeps its color.

If the technician proposes a transfer with a dye-blocking layer, test it on the intended fabric and cap shape. Check the color, logo edges, adhesion and any impressions or shine around the pressed area.

From the TACS production team

Take the same set of photos at each check and retain samples by fabric color. Use a separate trial for red even if a navy sample made from polyester has already passed.

Facebook
Twitter
Telegram
Email
Related news
Scroll to Top