How to Check Cap Size and Shape After Washing

Mục lục

To check dimensional change after washing, remeasure the same cap at the same closure setting after drying it as agreed. Compare front and side photos to document any change in shape.

Agree on measurement points and care conditions before washing

Pick points that matter for fit, such as the inside circumference at the sweatband or crown height at a fixed point. Mark the closure setting or strap position and photograph the sample before testing.

Record the sample ID, construction and intended wash and dry methods. If the fabric lot, stiffener or visor material changes, reassess which sample represents production.

Use a suitable textile test method to determine dimensional change after washing and drying. ISO 5077:2007.

Textile testing can use specified domestic washing and drying procedures. ISO 6330:2021.

For caps with curved panels, a closure and a multilayer visor, ask the lab about specimen preparation, measurement and reporting before citing a standard in the acceptance criteria.

Illustration of two cap samples side by side to compare shape before and after washing
Two caps arranged for a shape comparison. Use suitable tools and record measurements separately on the inspection sheet.

Record post-wash measurements and shape observations separately

CheckHow to compareWhat to record
Inside circumference and crown heightUse the same measurement points, closure setting, cap position and measuring technique.Before-and-after measurements in the same unit.
Crown and visorCompare front and side photos of the dry cap in the same position.Where creases appear, any warping and changes at the front.
ComponentsCheck the logo edges, stiffener, sweatband and closure. Adjust the closure and try the cap on again.Which components changed and how that affects use.
Care conditionsCheck the washing and drying methods and number of cycles completed.Dryness, measurement time and sample ID.
Measurement sheet for the same cap before and after laundering.

Use the results to decide whether to remake the sample

In a hypothetical test, the inside circumference remains close to its starting measurement, but the visor creases and changes shape. Save measurements and photos so the reviewer can identify what needs adjustment.

If the technician changes a component to correct the shape, keep the original as a control and test the new version under the same conditions. Agree in advance on dimensional limits and which signs of distortion to check.

From the TACS production team

If wearers wash caps at home and the operator uses centralized laundry, agree on the care method that represents the order. Use separate records if both processes need testing.

Facebook
Twitter
Telegram
Email
Related news
Scroll to Top