For a cap seam pull test, mark the section that takes the load when someone puts on, adjusts or removes the cap. Record the direction of the load and the type of failure to check before choosing a test.
Which specimens can be used for a seam pull test?
The grab method uses clamps that grip part of the specimen width. The machine pulls perpendicular to the seam at a constant rate of extension to determine the maximum force. ISO 13935-2:2026.
The method applies to straight seams, mainly in suitable woven fabrics. If the seam around the base of the crown is curved, mark the section so the lab can propose a check for that construction.

Choose a specimen based on where the load falls
| Situation | Specimen or component to prepare | What to record |
|---|---|---|
| Compare two seam constructions | Two straight-seam specimens made from the same fabric, if feasible. | Thread type, seam construction and any detail that changed between specimens. |
| Check the curved seam at the base of the crown | A finished cap with the seam section marked. | Where the load is applied and the test method recommended by the lab. |
| Check the buckle or adjustment strap attachment | The sewn buckle or strap assembly from the sample. | Pull direction, where to hold the sample and signs of failure to look for. |
Read the force measurement alongside the failure mode
Ask the lab to record the specimen ID, pull direction, preparation and failure mode. Report broken thread, fabric tearing along the stitch line and separation of the two fabric edges separately.
Use comparable test conditions where possible and keep before-and-after photos. If a straight specimen represents the seam construction, identify that specimen in the results.
From the TACS production team
Use separate report entries for straight-seam force testing and a pull check at the buckle attachment. Each result answers a different question about the sample.
Send a cap order inquiry to Trâm Anh Caps
Send photos of both sides, the logo file and placement, and mark the seam to check. Include how the cap will be used, cap style, quantity, delivery date and destination, test criteria and open decisions.
Minimum order of 300 pieces. Once you have these details, send your inquiry through the contact page.
Hotline/Zalo: 0916 381 830 (Mr. Đạo) or 0397 886 639 (Ms. Thủy).
Email: [email protected].
66 TTH29 Street, Tân Thới Hiệp Ward, District 12, Ho Chi Minh City.
NOTE: We only accept orders with a minimum quantity of 300 pieces [MOQ 300 pcs].













































